C223+
- Front Panel
- 2 x Input gain control
- 2 x Low/high frequency selector
- 2 x Low output gain control
- 2 x High output gain control
- 2 x Phase inversion switch
- 2 x 40Hz low cut switch
- Rear Panel
- 2 x Balanced XLR input connectors
- 4 x Balanced XLR output connectors
- Two-way stereo or three-way mono crossover via switch
- Switch to select normal or summed low frequency output
- Switch to select between 1x or 10x frequency
Share on facebook
Share on twitter
Share on linkedin
Description
| Connectors: |
XLR |
| Type: |
Electronically balanced/unbalanced, RF filtered |
| Impedance: |
Balanced>50KΩ,unbalanced>25KΩ |
| Max input level: |
+22dBu typical, balanced or unbalanced |
| CMRR: |
>40dB, typically >55dB at 1KHz |
| Output |
|
| Connectors: |
XLR |
| Type: |
Electronically balanced/unbalanced, RF filtered |
| Impedance: |
Balanced 200Ω, unbalanced 30Ω |
| Max input level: |
>+20dBu balanced/unbalanced into 600 Ohm or greater |
| Performance |
|
| Bandwidth: |
20Hz to 20KHz, +0/-0.5dB |
| Frequency response: |
<3hz to=””>90KHz, ±3dB |
| Signal-to-noise: | Ref: +4dBu, 22KHz measurement bandwidth |
| Dynamic range: | >106dB, unweighted, any output |
| THD+noise: |
<0.004% at +4 dBu, 1KHz <0.04% at +20 dBu, 1KHz |
| Interchannel crosstalk: |
<-80dB, 20Hz to 20KHz |
| Crossover Frequencies |
|
| Stereo mode |
|
| low/high: |
45 to 960Hz or 450Hz to 9.6KHz(x10 setting) |
| Mono mode |
|
| Low/mid: |
45 to 960Hz or 450Hz to 9.6KHz(x10 setting) |
| Mid/high: |
45 to 960Hz or 450Hz to 9.6KHz(x10 setting) |
| Filter type: |
Linkwitz-Riley, 24dB/octave, |
| Power Supply |
|
| Power consumption: |
220V ±10%/50Hz |
| Mains connection: |
15WATT IEC 320 receptacle |
| Physical |
|
| Dimensions: |
483x175x45mm |
| Weight: |
1.7kg |
| Shipping weight: |
2.5kg |
